Chercher des modèles 3D
Mecabricks studs too tall
Tech_Crate a commencé cette discussion dans Help and Tips
Avatar de Tech_Crate
Tech_Crate

I noticed what compared to ldraw parts and also a diagram of a lego piece that the studs on mecabricks ate just a bit too tall, this is not an issue on most bricks, but on things like heads this can be a very large difference.

3 réponses · Page 1 sur 1
Avatar de Sealund
Sealund

Could you specify how much taller they are? Any comparison images? Scrubs has been working on this project for seven years so I think he knows pretty well what he is doing, since he's made almost all parts himself. Here's some rules he set up for part modelling: https://www.mecabricks.com/en/forum/topic/15

Avatar de Tech_Crate
Tech_Crate

I have hade images showing the difference, but i dont know how to uploade them here

Avatar de Scrubs
Scrubs
Administrateur

Ldraw system is not always accurate to the real world. They chose 1.6mm I believe for the stud height while Mecabricks is using 1.8mm. The real dimension is somewhere around 1.75mm. The same goes for anti studs. They use 1.6mm while real depth of the cavity is 2.1mm
Ldraw is a system and they have their own convention and unit. On Mecabricks I try to be closer to real dimensions.

Publicité
3 participants
Avatar de Tech_Crate
Avatar de Sealund
Avatar de Scrubs
Conditions de services
|
Politique de confidentialité
|
Nous contacter
|

LEGO, le logo LEGO, la minifigurine et les configurations des briques et tenons sont des marques déposées de LEGO Group of Companies. ©2024 The LEGO Group.

Mecabricks, le logo Mecabricks et tout le contenu non couvert par les droits d'auteur du groupe LEGO sont, sauf indication contraire, ©2011-2024 Mecabricks.