The instructions for the new UCS Falcon are now available online, which means we can now build it on Mecabricks.
However, it being the largest Lego set (yet :p), building it would take a considerable amount of time. Which is why I suggested in the Official Sets topic that several builders could build different modules of the ship, which would be imported in a separate file for the set.
The bag 1, for example, can roughly be divided into three sub-assemblies : the rear, the middle, and the front of the frame (plus some other parts), so three people could build these modules separately.
I suggest naming the modules with their step numbers, to make it easier to complete the model. Going on with the bag 1 example, the three modules would be named "75192 / Steps 1 - 31", "75192 / Steps 32 - 70", and "75192 / Steps 78 - 124". Once all the modules for the first bag are done, we would need to assemble them, add the remaining parts (steps 71 to 77 and 125 to 130), and move on the the second bag (although most of the parts of the second bag are for the landing feet, so it can be done at the same time as the bag).
I think most modules can be done separately regardless of when they're added to the model, but to make sure the set is 100% complete, I think it would be easier to follow the building order, and doing so would help preventing two different people from building the same module without knowing.
I'll take the first module of the first bag (so "75192 / Steps 1 - 31"). Now, who wants to build the other two modules and the landing feet ?
Bag 1 (complete) :
Done :
-Steps 1-31 (rear of the frame) by Jeff
-Steps 32-70 (middle of the frame) by mathieub
-Steps 78-124 (front of the frame) by mathieub
-Steps 71-77 and 125-130 (remaining parts) Jeff
Bag 2 (complete) :
Done :
-Steps 131-149 (Landing feet) by mathieub
-Step 151 (Technic frame) by Masman8675
Bag 3 (complete) :
Done :
-Minifigs by Masman8675 (decorations for the Porgs and Chewbacca's legs and Chewbacca's head are missing)
-Steps 131-149 (Dejarik table room) by mathieub
-Steps 157-173 (Gun bay module) by Masman8675
-Steps 202-210 (Lower front panel) by mathieub
-Steps 212-230 (Landing foot 2) by mathieub
-Steps 234-240 (greebled panel) by mathieub
-Steps 242-247 (greebled panel) by mathieub
Bag 4 (complete) :
Done :
-Steps 250-280 (interior module) by mathieub
-Steps 299-306 (right side rear panel) by Masman8675
-Steps 308-315 (left side rear panel) by Masman8675
Bag 5 (complete) :
Done :
-Steps 317-325 (rear panel) by mathieub
-Steps 362-391 (rear side frames) by Masman8675
-Steps 328-360 (rear bottom panel) by Jeff
Bag 6 (complete) :
Done :
-Step 396 (Technic frame) by Masman8675
-Steps 397-438 (left mandible frame) by Masman8675
-Steps 440-469 (right mandible frame) by Sealund
Bag 7 (complete) :
Done :
-Steps 471-499 (left mandible bottom panel) by Sealund
-Steps 501-529 (right mandible bottom panel) by Sealund
Bag 8 (complete) :
Done :
-Steps 531-548 by Sealund
-Steps 550-554 by Sealund
-Steps 556-573 by Sealund
-Steps 575-579 by Sealund
-Steps 581-593 (bottom side panels) by Sealund
-Steps 594-606 (bottom side panels) by Sealund
-Steps 607-615 (left mandible internal greebling) by mathieub
-Steps 617-624 (left mandible internal greebling) by mathieub
-Steps 626-635 (right mandible internal greebling) by mathieub
-Steps 637-645 (right mandible internal greebling) by mathieub
Bag 9 (complete) :
Done :
-Steps 654-688 (right mandible top panel) by mathieub
-Steps 690-724 (left mandible top panel) by mathieub
-Steps 647-652 (front top right greebling) by mathieub
-Steps 726-727 by Jeff
Bag 10 (complete) :
Done :
-Steps 728-744 (bottom left panel) by Masman8675
-Steps 746-771 (exit ramp) by Masman8675
-Steps 773-823 (bottom turret) by mathieub
Bag 11 (complete) :
Done :
-Steps 825-864 (right corridor top panel) by Jeff
-Steps 866-904 (left corridor top panel) by Stas
Bag 12 (complete) :
Done :
-Minifigs (Finn and BB-8 )
-Steps 906-926 (heat vents - central panel) by Masman8675
-Steps 928-954 (heat vents - left panel) by Stas
-Steps 955-979 (heat vents - right panel) by Stas
Bag 13 (complete) :
Done :
-Steps 981-998 (heat vents - middle right panel) by mathieub
-Steps 1000-1014 (top rear left panel) by mathieub
-Steps 1016-1028 (heat vents - middle left panel) by mathieub
Bag 14 (complete) :
Done :
-Steps 1030-1080 (top middle front panel) by Jeff
Bag 15 (complete) :
Done :
-Steps 1082-1098 (airlock - x2) by Jeff
-Step 1100 (rectenna support) by mathieub
-Steps 1101-1124 (top left front panel) by mathieub
-Steps 1126-1134 (top middle left front panel) by mathieub
Bag 16 (complete) :
Done :
-Minifigs (Ep. VII Han Solo and Rey)
-Steps 1136-1206 (cockpit) by Stas
-Step 1208 (additional parts) by Stas
-Steps 1210-1260 (cockpit access tunnel) by Stas
Bag 17 (THE LAST JEDI BAG) (complete) :
Done :
-Step 1262 (Mynock) by Masman8675
-Steps 1263-1268 (top right front panel) by mathieub
-Steps 1270-1281 (top middle right front panel) by Masman8675
-Steps 1283-1349 (top turret) by Masman8675
-Steps 1351-1359 (rectenna - round dish) by Masman8675
-Steps 1361-1372 (rectenna - rectangular dish) by Masman8675
-Step 1375 (tractor beam projectors) by Masman8675
-Steps 1376-1379 (UCS plaque) by mathieub
@Stas No problem, glad to help! 😃
Model updated, thank you gentlemen. There are now more than 7200 parts in the model. Here's what's left to build :
Bag 15 :
-Steps 1101-1124 (top left front panel)
-Steps 1126-1134 (top middle left front panel)
Bag 17 (THE LAST JEDI BAG) :
-Step 1262 (Mynock)
-Steps 1263-1268 (top right front panel)
-Steps 1270-1281 (top middle right front panel)
-Steps 1351-1359 (rectenna - round dish)
-Steps 1361-1372 (rectenna - rectangular dish)
-Step 1375 (tractor beam projectors)
-Steps 1376-1379 (UCS plaque)
We're almost done ! 😄
I'll take Steps 1262 (Mynock), 1270-1281 (Top Middle Right Front Panel), and 1375 (Tractor Beam Projectors). If I am done, and there are still more options, I shall bite at them too.
EDIT: I'll add Steps 1351-1359 Round Rectenna and 1361-1372 Rectangular Rectenna to my list.
Step 1262 Mynock: https://www.mecabricks.com/en/models/lo8v0xk1vr3
Steps 1270-1281 Top Middle Right Front Panel: https://www.mecabricks.com/en/models/6mLvzBdgvAw
Steps 1351-1359 Round Rectenna: https://www.mecabricks.com/en/models/PKbjQJyKvdG Missing Decal: 50990pb06
Step 1375 Tractor Beam Projectors: https://www.mecabricks.com/en/models/01w2rbRV28W
Steps 1101 - 1124 : https://www.mecabricks.com/en/models/nKZvmJNdaG6
Steps 1126 - 1134 : https://www.mecabricks.com/en/models/kLyjWyeJaJr
Steps 1263 - 1268 : https://www.mecabricks.com/en/models/qxov71gN20D
Steps 1376 - 1379 : https://www.mecabricks.com/en/models/LVyvnopoal3
Oh, so it seems the model is complete now (except some missing parts and prints). I'll add everything to the final model.
Okay, I think we can consider the model finished. I've made the file available in the editor, so you can have a look at everything and check eventual building errors : https://mecabricks.com/en/workshop/87X2RWRqjZY
Nice work guys!
Were're not quite done yet! Here's Steps 1361-1372 (Rectangular Rectenna): https://www.mecabricks.com/en/models/qxov71gz20D
I just went and checked for errors, and I have verified that there are no doubles. But, I did find out that the feet (and presumably the rest of the ship) are not touching the ground by .061, except for the two rear left feet, which are .062...
Now we're good !
I'll add the decorated parts and the cockpit (And Chewbacca's head !) when they're available. Thanks again and congratulations to everyone who worked on this. 😉
Woo hoo, we're done building! Congratulations everyone! 👍
Thanks for being the host for this Jeff, it was fun! 😃 Now we just need to add up how many pieces each of us contributed, then do a percentage calculation. 😜
Just saw that :
http://www.steindrucker.com/millennium-falcon-package-75192
Perhaps we could get in touch with them to get some files to do the missing stickers ?
LEGO, le logo LEGO, la minifigurine et les configurations des briques et tenons sont des marques déposées de LEGO Group of Companies. ©2024 The LEGO Group.
Mecabricks, le logo Mecabricks et tout le contenu non couvert par les droits d'auteur du groupe LEGO sont, sauf indication contraire, ©2011-2024 Mecabricks.