Chercher des modèles 3D
Incorrect snapping of beams
mattfr4 a commencé cette discussion dans Bug Reporting
mattfr4

Hi,
Looks like those two beams can't be connected by the third :

https://scontent-cdg2-1.xx.fbcdn.net/v/t35.0-12/20597651_1953077434910194_1807763742_o.png?oh=e7906e470a5077d8518280c484b90f67&oe=598391C4
instruction :
https://scontent-cdg2-1.xx.fbcdn.net/v/t35.0-12/20615262_1953077728243498_760038614_o.png?oh=102003d91b1b319d06b728bfece9282f&oe=5982931A

4 réponses · Page 1 sur 1
Avatar de Masman8675
Masman8675

It appears that the beam is on a slight, not very noticeable angle. Try rotating the smaller assembly clockwise on the Dark Bluish Grey (3L?) pin, as this should line it up.

Hope that helps!

Avatar de Scrubs
Scrubs
Administrateur

Yes, it cannot be a right angle. The length of the beam is 32mm when the distance to cover is 33.94mm. It is missing 1.94mm!
Angle is: arcsin(16/24) * 2 = 83.62°
the two other angles of the triangle are: (180 - 83.62) / 2 = 48.19°

http://i.imgur.com/f5gsYb2.png

mattfr4

Ah, I appear to have missed it indeed. Sorry !

Avatar de Masman8675
Masman8675

No worries! 😃

Publicité
3 participants
Avatar de Masman8675
Avatar de Scrubs
Conditions de services
|
Politique de confidentialité
|
Nous contacter
|

LEGO, le logo LEGO, la minifigurine et les configurations des briques et tenons sont des marques déposées de LEGO Group of Companies. ©2024 The LEGO Group.

Mecabricks, le logo Mecabricks et tout le contenu non couvert par les droits d'auteur du groupe LEGO sont, sauf indication contraire, ©2011-2024 Mecabricks.