MecaBricks Workshop - A Primer for First Time Users
djm a commencé cette discussion dans Help and Tips

I'm a first-time user of MecaBricks. I've been using both LDD and MLCad up to this point. As a consequence, I started using MecaBricks with a LDD/MLCad mindset. That mindset needed re-tuning. It is possible that other new users will have a similar mindset when they first use MecaBricks. I have put together a short primer (see below) for new users to get them going with using MecaBricks. It's purpose is to get people interested in using MecaBricks so is consciously not an extensive "how-to" guide. The primer begins after this paragraph.

This primer provides a brief introduction on how to use the MecaBricks Workshop. It is a simple "how to get started" guide. As such, it describes only a small amount of the MecaBrick workshop's capabilities - enough to whet your appetite and want to come back for more. The primer is presented as a sequence of 10 steps, with each step assuming the previous step has been undertaken. Each step is formed by some descriptive text and one or more screenshots.If you are used to using either Lego Digital Designer (LDD) or Mike's LEGO CAD (MLCAD) to design your model, note that a slight mindset shift will be required when using MecaBricks. It's not a big difference but it may be enough to have you scratching your head to begin with. Attention will be drawn to the difference at an appropriate point in the primer.

The MecaBricks workshop can be trialed without the need to create an account. This primer assumes that you have you browser opened and are already in the MecaBricks workshop. If you aren't, please navigate to [url]http://www.mecabricks.com/en/workshop[/url]. So without further ado, here are the 10 steps that make up the primer for first time users.

1) Pick a colour
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/01_choose_colour.jpg
Figure 1 - Pick a Colour
The lower part of your browser window is where you select the part that you want to add. There is a pop-up list which categorizes the parts. When you pick a category, the list of available parts will change to reflect the chosen category.

Begin by picking the colour that you want the part to be, Click on a colour in the bottom right hand side of the window (see Figure 1). Note that if a part is selected when you choose a colour, the colour of the selected part will change. When you are looking to add a part which is different to the colour shown on the colour palette, ensure that no part is selected prior to selecting the colour.

2) Add a Part
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/02_loading_brick.jpg
Figure 2 - Part Loading
Use the forward and backward icons on each end of the list of part images to view the parts available within the selected category. When you see the part you want, click on it. You may see a "progress" indicator displayed while the part loads (see Figure 2).

3) Part Placed at the Origin
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/03_placed_brick.jpg
Figure 3 - Part placed
The first part will be placed at the origin (X, Y and Z co-ordinate of 0, 0, 0). Notice the three differently coloured arrows near the brick. Each part will have one of these and it will be displayed when the part is selected. The red arrow points along the part's X axis, the green arrow points along the part's Y axis and the blue arrow points along the part's Z axis. You will see the impact rotating a piece has on these arrows in step 9. It is also worth noting that in the bottom left hand corner is a similar (but smaller) red, green and blue axis indicator. These are used to indicate the current orientation of the view of the model being built. When you rotate the view, this indicator will rotate correspondingly.

4) Moving a Part
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/04_move_brick.jpg
Figure 4 - Moving a Part
LDD/MLCAD mindset shift. The way a part is moved in the MecaBricks workshop is different to that for LDD and MLCAD. You move a brick by moving the mouse onto the axis for the direction which you want to move the brick (see figure 4). The arrow will change colour to yellow. Click and hold the left mouse button down and drag the part in the direction which you want it to move.

5) Select the Next "Target" Point
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/05_select_target_point.jpg
Figure 5 - Select First Target Point
The currently selected brick is drawn in red. When you move the mouse over the selected brick, it will turn blue and display some orange points. One use for these points is to determine where the next part will be added. When you position the mouse over one of the points, the point will turn green. Clicking the left mouse button will "lock in" the point as the target point.

6) Add the Second Part
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/06_add_secind_brick.jpg
Figure 6 - Add Second Part

Pick the next part to be added by selecting an appropriate part category, scrolling to the desired part and clicking on the desired part. The part will be added to the model using the target point of the currently selected part. If a part on the model is not selected when the new part is picked, the new part will be added at the model's origin (0, 0, 0).

7) Select the Next "Target" Point
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/07_select_second_target_point.jpg
Figure 7 - Select Second Target Point
Just as with step 5), a target point is selected on the newly added part. Notice that a target point has an X, Y, Z orientation, just like a part has. The axis orientation for a target point may differ from that for the part (see Figure 7).

😎 Add the Third Part
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/08_add_third_part.jpg
Figure 8 - Add Third Part
Pick the next part to be added by selecting an appropriate part category, scrolling to the desired part and clicking on the desired part. The part will be added to the model using the target point of the currently selected part (see Figure 8 ).

9) Rotate the Part
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/09_rotate_part_45.jpg
Figure 9a - Part Rotation #1
Having placed a part, the arrow keys can be used to quickly rotate the part by 45 degrees along different axes. Pressing the right arrow key once will rotate the part clockwise around the Y axis (see figure 9a) (assuming the viewpoint for the rotation is looking towards the part's axes origin).

http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/09_rotate_part_90.jpg
Figure 9b - Part Rotation #2
Pressing the right arrow key a second time will rotate the part clockwise another 45 degrees around the Y axis (see figure 9b).

The key combinations to rotate a part around an axis are;
Left arrow - Anti-clockwise rotation around the Y axis
Right arrow - Clockwise rotation around the Y axis
Up arrow - Anti-clockwise rotation around the X axis
Right arrow - Clockwise rotation around the X axis

10) "Show Me The Edges"
http://bricksafe.com/files/djm/MecaBricks%20New%20User%20Primer/10_edges_and_view_rotate.jpg
Figure 10 - "Show Me The Edges"
It is possible to change the way in which parts are displayed. For example, edges can be added to the model (see Figure 10), which you may find will make it easier to see individual parts.

Conclusion
The MecaBricks workshop is a powerful CAD tool for LEGO. This primer has touched on a few of its capabilities. You are encouraged to explore and experiment further to discover more about it.

Plus…
373 réponses · Page 7 sur 19

How do you use flexible pieces so both side snap to where you want them to?

Avatar de Scrubs
Administrateur

In flexible mode, you can select the end and snap it to any points in the scene.

Can you rotate a piece on mobile?

make mecafigs and mecafaces and movable minifigure parts not cost us money!!!

can i make custom designs for a face, and if so, how?
please respond soon; i need to design a face for a lego ideas contest; )

@Hmmmmmmm, You can't do the grapics in mecabricks, you'll have to do it in a graphics software like Adobe Illustrator or Inkscape. Then you can add the graphics to mecabricks to your own custom parts.

Here you can find some guidelines, https://www.mecabricks.com/en/forum/topic/630 and here, https://www.mecabricks.com/en/forum/topic/1357(this thread is partially outdated).

Newby here.... I am trying to make a few changes to a current lego set, Hidden Side Newbury HS in particular. I only want to change the color of a few pieces and that's it. Every time I highlight the piece I want to change the color of and then click that color I want to change it to... the entire set turns to that color. I'm hoping this just user error. Thanks for any and all help! - Dan

Avatar de Scrubs
Administrateur

Make sure that you unlock the groups to reach only the part you want to select.
(You probably noticed that when you select a part, the whole model is selected - red colour)

where is the part count? i can see how many ive used but i need to know every brick in the model so i can order them.

How do you hinge Technic Bricks?

It seems as clicking and moving a part at time resizes it but I can't figure out how to reliably resize a part. Is there a tutorial on that somewhere?

@rhw80 You cannot resize parts in the Mecabricks workshop. You can only move and rotate them.

Hmm, I'm not sure what's going on then. If l click the green dot in the center of a brick and move it diagonally, a diagonal white line appears and the brick appears to change size as it moves along that line.

I'm guessing what's actually happening is that it's moving toward you and so appears to get bigger as it gets closer in fact.

how to post a building?

Click on your username in the top right. In your model library, select the model you want to make public. It shall open a properties panel, in which you can check the box that says make public. Then click save and it will be available in the public library.

stop requesting me this garbadge

Publicité
172 participants
Avatar de djm
Avatar de Scrubs
Avatar de B1Trash
Avatar de Sealund
Avatar de JoeCheesy765
Avatar de Sim
Avatar de KingofAce
Avatar de ArmoredBricks
Avatar de Alpha.Stronghold
Avatar de MoparGuy00
Avatar de SpecterVamp
Avatar de brickboy123
Avatar de greenpanda
Avatar de Swqrd
Avatar de Hoodedspider
Avatar de GavGeist650
Avatar de axolotl_boi
Avatar de PyrokineticNinjaMaster
et d'autres

LEGO, le logo LEGO, la minifigurine et les configurations des briques et tenons sont des marques déposées de LEGO Group of Companies. ©2024 The LEGO Group.

Mecabricks, le logo Mecabricks et tout le contenu non couvert par les droits d'auteur du groupe LEGO sont, sauf indication contraire, ©2011-2024 Mecabricks.