Hi,
As a ldraw user, I also use ldraw parts in Blender, and to make the comparison, I exported the plate 1x1 round with collada and wavefront, and compared it with the one from ldraw. Apart the fact that ldraw are 10 times small, that I can corrected with a scale operation, there are still some differences. I checked with the parts showed here : http://www.mecabricks.com/en/forum/topic/15 , and the measurements are the same, exactly identical with the result from ldraw to Blender.
So, I guess there is a kind of corruption in the export methods, but is it from blender to json, or from json to collada / wavefront, I don't know. I already saw this corruption with some parts exported from 3DS max, but I don't remember the output format (json or wavefront). Maybe a comparison between the original mecabricks blender creation and the export version reimport in blender will be great first step to understand where the problem come from.
Hello,
I'm not too sure I understand the issue correctly.
I know there is a factor 10 between ldraw parts and my parts (I use 1 Blender unit for 1mm) which is easy to correct as you said.
However, detail dimensions for ldraw and mecabricks shall be different. For instance, they use 1.6mm stud height where I use 1.8mm. Besides as per the post you quoted, I slightly reduce the overall dimensions to leave a gap when parts are assembled in mecabricks. e.g. 7.92mm instead of 8mm for the 1x1 brick width. Therefore you shall not get exactly the same dimensions for a same part coming from ldraw or mecabricks.
I did a quick trial to compare my parts from original Blender files and exported in collada or obj from mecabricks.
Parts tested: 3024 Plate 1X1 and 4073 Round Plate 1X1. All 3 instances of each part design match perfectly.
So parts don't seem to be impacted by the different 3D format conversions (Blender > json > collada or obj).
Let me know if I did not correctly understand your question.
You perfectly answered my question ^^ . The dimensions modifications you indicate, apply to a round plate 1x1, make it match nearly perfectly, so it's not a corruption, but a real difference. Thanks for the answer.
With this conversion method, I guess you can easily transform nearly all the ldraw parts. I have a blend file with more than 600 parts already imported, if you want 😉 .
So I actually understood properly 😉
I'd me happy to have a look at your file to see if I can easily tweak them to fit mecabricks dimension system.
LEGO, le logo LEGO, la minifigurine et les configurations des briques et tenons sont des marques déposées de LEGO Group of Companies. ©2024 The LEGO Group.
Mecabricks, le logo Mecabricks et tout le contenu non couvert par les droits d'auteur du groupe LEGO sont, sauf indication contraire, ©2011-2024 Mecabricks.