Millenium Falcon #75192 - Community build

I'll go for steps 32 to 70!

Great ! Here's the link for the first module : https://www.mecabricks.com/en/models/QeDvVod8aBR

Here's the second module : https://www.mecabricks.com/en/models/Z79a8zZmj8w

Jeff, since you were the initiator of the project I suggest that you create the final model and assemble evry submodel we publish here, is this OK for you ?

I'll advance with the landing gears, steps 131 - 149 : https://www.mecabricks.com/en/models/QVzvMMyEvJp

while the boss is away i start sets 78 - 124 😉

Scrubs

Administrator

Let me know the missing pieces. I'll make them. It might be a bit hard for the round windscreen. I know that it is also found in a ninjago set but I don't have it and it is a limited retail.

Steps 78 - 124 : https://www.mecabricks.com/en/models/X1k2qoWYvE0 ; now back to work 😦 see ya

Wow, you're fast mathieub ! At this rate you'll have finished the whole set by yourself by the end of the week. 😛

I think parts-wise we're good, we're only missing the cockpit pieces and the decorated pieces.

I began assembling the modules, but I haven't added the other parts yet (steps 71-77 for example), I'll do that later : https://www.mecabricks.com/en/models/87X2RWRqjZY

We are dealing with easy steps right now, I expect some quite serious challenge in the future steps !

Steps 175 - 200 : https://www.mecabricks.com/en/models/4qxv46gG2dJ

I'd like to build something, but I'm trying to figure out which section to build. 😛 Could we have a list up at the top for sections completed, and ones yet to be done please? Thanks!

Say, I just noticed that on page 15 there's vectors of some decals! That'll make tracing easier...

I've updated the first post, Masman8675. It's not easy to come up with names for the different modules. 😛

Right now I think it would be better to focus on finishing the first three bags before moving on to the rest of the ship. What you can do :

-The small frame at the step 151. With that, the bag 2 will be completed
-The minifigs for the bag 3 (2 Porgs, Chewbacca and C-3PO)
-The module built at the steps 157-173
-The panels built at the steps 202-210, 234-240 and 242-247.

There are also some small sub-assemblies, like the steps 155 or 232, but I can add them myself.

I'll start with the first 3 for now. ~~I may do #4 as well.~~ No need now. 😛

Okay, thank you !

In the meantime, I've completed the bag 1 (at least I hope so, I may have forgotten some parts), and I've added what mathieub has built for the bag 3 to the model. We're already over 1300 parts !
I'll finish the bag 2 later.

My pleasure! Here's the first two:

Step 151 Sub Assembly: https://www.mecabricks.com/en/models/r0DvYkyZ29e

Bag 3 Minifigs: https://www.mecabricks.com/en/models/Z79a8zXqj8w
MISSING:
15307pb01 (Chewie's Head), 970c00pb281 (Chewie's Legs), and 20952pb02 (Porg Head)

1300 already! This should be done in no time at all then! 😮

-Steps 234-240 (greebled panel) : https://www.mecabricks.com/en/models/lo8v0NmV2r3
-Steps 242-247 (greebled panel) : https://www.mecabricks.com/en/models/6mLvzElqjAw

Praise Pythagorus for the angles calculation 😄

-Steps 202-210 (Lower front panel) : https://www.mecabricks.com/en/models/yDp2lmAPjMV : I already positionned the inverted bows needed at step 212

Gun Bay Module Steps 157-173: https://mecabricks.com/en/models/X1k2qoXovE0

Great ! I've added all these sub-assemblies to the main model. We're now over 1600 parts.

Bags 1 and 2 are now done, I'll have to complete the bag 3, but you can already begin working on the bag 4 if you want, like the steps 250-280 and 288-297 modules. I'll soon update the first post accordingly.

~~I'll do the 288-297.~~ I don't like having to make a list of missing parts. 😛

EDIT: Here's 288-297: https://mecabricks.com/en/models/WPkaJ4dxjxM

I'll also do 299-306 and 308-315.

First post updated. The building of the bag 4 should be fast (especially with you two, I can't keep up ! :p), there aren't many modules.

That looks a lot nicer, all organised up top. 👍

Here's the side panel from 299-306: https://mecabricks.com/en/models/3Lkj9NyBvAp If I tried you'd probably have to fix it anyways, so I left the small panel on it straight for you to angle it correctly. 😉

And the other side panel, 308-315: https://mecabricks.com/en/models/B9P2kxlAjon

That's it for today. 😃