Just a quick question regarding parts requests:
I'm missing a sticker or two for 75139 Battle on Takodana and I was just wondering: do the stickers count as parts? Or do they count as printed parts?

Also, is there a forum for "Color Requests"? I'm missing the color that's between "Dark Stone Grey" and "Black".

Do you mean old dark grey? Just check the legacy box to show it.

Thanks for the tip! I'll try that. 😃

So, I posted a bit over a month ago with a couple of parts, and every time I found a new missing one I simply updated my previous post, so I think the majority of my requests went unseen...I'm attempting to build models of every LEGO Star Wars set (slowly but surely), and I suppose I'll post in categories per year whenever I finish it. So for the 1999 sets, here is a list of missing pieces:
7101 Lightsaber Duel: Part 2342, Minifig Control Panel (http://rebrickable.com/parts/2342)
Part 30410, Minifig Hair Pulled Back (http://rebrickable.com/parts/30410)
7110 Landspeeder: Part 30358, Engine, Strakes, 2 Top Studs, 2 x 2 Bottom Tile (http://rebrickable.com/parts/30358)
7131 Anakin's Podracer: Part 6248, Wheel Freestyle with Pin Hole (http://rebrickable.com/parts/6248)
Part 30475, Minifig Hair Long & Half Braided (http://rebrickable.com/parts/30475)
7150 TIE Fighter & Y-Wing: Part 30366, Windscreen 3x6x5 Bubble (http://rebrickable.com/parts/30366)
Part 2637, Technic Link 1x16 (http://rebrickable.com/parts/2637)
7161: Gungan Sub: Part 33122, Animal Starfish (http://rebrickable.com/parts/33122)
Part 30084, Animal Manta Ray (http://rebrickable.com/parts/30084)
Part 2564, Boat Anchor - Single Top Hole (http://rebrickable.com/parts/2564)
Part 2582, Hinge Panel 2x4👨 1/3 (http://rebrickable.com/parts/2582)
7171: Mos Espa Podrace: Part 2516, Minifig Chainsaw/Drill Body (http://rebrickable.com/parts/2516)
Part 30034, Panel 3x5 Solar/Clip-On/Deltoid (http://rebrickable.com/parts/30034)
Part 2854, Technic Engine Crankshaft Centre (http://rebrickable.com/parts/2854)
Part 30209, Plate Special 1 x 2 with 4 x 4 disk at 90 degrees (http://rebrickable.com/parts/30209)
There were also some printed pieces (which, of course, aren't as important as the physical models, but would be nice to have nonetheless):
Part 2431ps1, Tile 1 x 4 with Black and Copper Circuits Print (http://rebrickable.com/parts/2431ps1)
Part 6069ps3, Wedge 4 x 4 Triple with Droid Fighter Print (http://rebrickable.com/parts/6069ps3)
Part 3069bpr0086, Tile 1 x 2 with Stylised Computer Console Print (http://rebrickable.com/parts/3069bpr0086)
Parts 3821ps1 & 3822 ps1, Door 1 x 3 x 1 Left & Right with SW Red on Silver Print (http://rebrickable.com/parts/3822ps1, http://rebrickable.com/parts/3821ps1)
Part 3298ps0, Slope Brick 33 3 x 2 with SW Crisscross Print (http://rebrickable.com/parts/3298ps0)
Part 3039ps2, Slope Brick 45° 2 x 2 with SW AT-AT Print (http://rebrickable.com/parts/3039ps2)
Part 30363ps1, Slope Brick 18 4 x 2 with Orange and Grey Rectangles Print (http://rebrickable.com/parts/30363ps1)
Part 3068bpr0071, Tile 2 x 2 with SW Rebel Mechanical Print (http://rebrickable.com/parts/3068bpr0071)
Part 3039pr0008, Slope 45° 2 x 2 with Death Star Trench Computer Print (http://rebrickable.com/parts/3039pr0008)
Part 2431pr0027, Tile 1 x 4 with 5 Red Stripes Print (http://rebrickable.com/parts/2431pr0027)
Part 6069ps1, Wedge 4 x 4 Triple without Stud Notches with SW X-wing Nose Print (http://rebrickable.com/parts/6069ps1)
Part 30370ps4, Minifig Helmet SW Rebel Pilot with Checkered Print (http://rebrickable.com/parts/30370ps4)
Part 3039ps3, Slope Brick 45° 2 x 2 with Green and Grey Controls Print (http://rebrickable.com/parts/3039ps3)
Part 3039ps4, Slope Brick 45° 2 x 2 with SW Blue Segmented Fish Print (http://rebrickable.com/parts/3039ps4)
Part 2431ps0, Tile 1 x 4 with SW Black Naboo Symbols Print (http://rebrickable.com/parts/2431ps0)
Part 4346ps1, Container - Box 2 x 2 x 2 Door with Slot and SW Rebel Print (http://rebrickable.com/parts/4346ps1)
Part 4150ps5, Tile, Round 2 x 2 with Star Wars Imperial Print (http://rebrickable.com/parts/4150ps5)
Part 30366ps1, Windscreen 3 x 6 x 5 Canopy with Octagonal Design Print (http://rebrickable.com/parts/30366ps1)
Part 30366px3, Windscreen 3 x 6 x 5 Bubble with Sith Infiltrator Print (http://rebrickable.com/parts/30366px3)
Part 4150ps2, Tile, Round 2 x 2 with SW Sith Infiltrator Print (http://rebrickable.com/parts/4150ps2)
Part 3069bps9, Tile 1 x 2 with Underwater Navigation Print (http://rebrickable.com/parts/3069bps9)
Part 2582px1, Hinge Panel 2 x 4 x 3 1/3 with Blue SW Gungan Sub Print (http://rebrickable.com/parts/2582px1)
Part 30366ps2, Windscreen 3 x 6 x 5 Canopy with SW Blue Forcefield Print (http://rebrickable.com/parts/30366ps2)
Part 3068bps3, Tile 2 x 2 with SW Orange and White Print Star Wars, set 7171, Mos Espa Pod Race, Sebulba (http://rebrickable.com/parts/3068bps3)
Part 2335ps1, Flag 2 x 2 Square with Orange and Silver Circuitry Print (http://rebrickable.com/parts/2335ps1)
Part 4150ps1, Tile, Round 2 x 2 with SW Podracer Vent Print (http://rebrickable.com/parts/4150ps1)
I know its a WHOLE lot to ask, and because of that I wouldn't really expect it all to be added. However, if anyone is willing to take up the challenge on at least some of these bricks, I would be very thankful indeed!

The following parts would be nice to have:

http://brickset.com/parts/6051543
http://brickset.com/parts/6005837

Thanks in advance!

Wlange, part #6051543 is already in the database. It's in the Bricks-Special-Circles category. Or in the search bar you can type 48092 and it will come up. 😉

Thanks, good to know.

Your welcome! 😃

This would be something useful that I would appreciate if it was added.
http://brickset.com/parts?query=10169

Part: 57519
http://alpha.bricklink.com/pages/clone/catalogitem.page?id=75310#T=C&C=11

I see the tread link is modeled but not the above mentioned wheel. This is essential for any tracked model.

Bonjour,

Quelques pièces manquent pour finir le set 75140 - Resistance Troop Transporter

https://alpha.bricklink.com/pages/clone/catalogitem.page?P=92591&idColor=86#T=C&C=86
https://alpha.bricklink.com/pages/clone/catalogitem.page?P=22885&idColor=86
https://alpha.bricklink.com/pages/clone/catalogitem.page?P=98835&idColor=86

Par avance merci 😉

Bonjour,

Une pièce manque pour finir le set 75131 - Resistance Trooper Battle Pack

https://alpha.bricklink.com/pages/clone/catalogitem.page?P=15071&idColor=11

Par avance merci 😉

Hello!
Quite a few sets based on Star Wars: The Force Awakens have been built on here, but practically none of them have any parts for the minifigures.
I've been wanting to make all of the new minifigures from SW:TFA, but very few of the needed parts are on here.
If possible, it would be kinda nice to have the parts for the minifigs at some point. 😃

Molds Needed
6124605: Mini Helmet No. 84 "Dec No. 1" http://brickset.com/parts/6124605
6122095: Mini Figure Wig No. 101 http://brickset.com/parts/6122095
6125219: Shoulder Cape No.1, "No.1" http://brickset.com/parts/6125219 (not sure if cloth works in Mecabricks...?)
6124040: Mini Figure Helmet No. 78 "Dec No 1" http://brickset.com/parts/6124040
6122094: Mini Figure Helmet No. 79 http://brickset.com/parts/6122094
6124760: Mini Helmet No. 85 Ass."Deco No.1" http://brickset.com/parts/6124760
6124666: Mini Hat No. 10 "Deco No. 1" http://brickset.com/parts/6124666 (this mold has multiple decorations)
6147027: Mini Helmet No. 80 Ass."Deco No.1" http://brickset.com/parts/6147027 (this mold has multiple decorations)
6124670: Mini Helmet No. 86 "Dec No. 1" http://brickset.com/parts/6124670
6124646: Mini Hat No. 8 "Deco No.1" http://brickset.com/parts/6124646 (BB-8's head! 😄)
6124643: Double Sphere 2X2X1 2/3 W/Knob"Dec No.1" http://brickset.com/parts/6124643 (the body! 😄)
6126488: Mini Figure Helmet No. 75 "Dec No. 1" http://brickset.com/parts/6126488 (This mold has one decoration for the Stormtrooper and another for Captain Phasma)
6126540: Mini Figure Helmet No. 76 "Dec No 1" http://brickset.com/parts/6126540
Captain Phasma's Cape (I couldn't find it on Brickset. Oh well.)
6124603: Mini Figure Helmet No. 83 "Dec No.1" http://brickset.com/parts/6124603
6122096: Mini Wig No. 104 http://brickset.com/parts/6122096 (this piece also appears in 75827 Firehouse Headquarters from Ghostbusters, I believe)
Minifig, Headgear Helmet SW Resistance Trooper with Trans-Yellow Visor with Tan Rectangles and Black Circles Pattern http://alpha.bricklink.com/pages/clone/catalogitem.page?P=23947c01pb01&idColor=69#T=C&C=69
Minifig, Visor Chin Guard for SW Resistance Trooper Helmet http://alpha.bricklink.com/pages/clone/catalogitem.page?P=bb703&idColor=69#T=C&C=69
Minifig, Headgear Cap, SW First Order Crew Member with Silver First Order Insignia Pattern http://alpha.bricklink.com/pages/clone/catalogitem.page?P=23850pb01&idColor=11#T=C&C=11
Minifig, Head Modified Alien SW with Maz Kanata Pattern http://alpha.bricklink.com/pages/clone/catalogitem.page?P=24601pb01&idColor=150#T=C&C=150
I know it's a L.O.T. to ask, but I think that I'm not the only one on the web who'd like to do this. 😃

If you have them, don't hesitate to redraw/vectorize the prints as explained in this post http://www.mecabricks.com/en/forum/topic/128
Of course it would help 😉

How do I put the .png's with the textures onto a forum post?
Also, what Forum/Topic do I put them in?

Scrubs prefers that you send them through an email. Just click the contact us button or send an email.

OK. Thanks!

I'd really appreciate if somebody added this part:
https://alpha.bricklink.com/pages/clone/catalogitem.page?P=2875#T😒&C=9&O={"color":9}

It's the only one I need to finish my latest creation! 😃

I've tried to make a couple of textures, but they don't have the right UV by a long shot, methinks, and the coloring is not correct either. It would probably take longer to repair than to make. Oh well.